Assembly instruction vacuum cleaner PART 2

Comments

  1. Unknown8 October 2018 at 02:56

    Do you still have the 3d project of the robot structure? If yes, what do you think in share?

    ReplyDelete
    Replies
    1. ruslanzel13 October 2018 at 23:00

      Hello, Henrique. Yes, I have 3d project, and I started publication this project. Thank. Best regards.

      Delete
  2. Unknown16 October 2018 at 19:04

    Keep up the good work! My printer is running now :)

    ReplyDelete
    Replies
    1. ruslanzel16 October 2018 at 19:21

      Thank so much, I strive :)

      Delete
    2. Unknown26 October 2018 at 18:23

      Alright so I printed all parts and it´s so much fun! but one file is missing...
      the middle part of the top where the battery display is located is not part of the files ;)
      Could you check that if that is true and could you upload it again?
      thank you! :D

      Delete
    3. ruslanzel26 October 2018 at 23:11

      Hello. I checked archive... files where located hole for battery display is top_01_lft.stl and top_01_rght.stl. Check Your archive one more time please. Thank. Best regards.

      Delete
    4. Unknown11 November 2018 at 21:31

      sorry yeah i just found it out after i posted here :D

      so i printed all parts and i am building an adapter for my motors to fit in (they are different).
      compared to vacuum robots your wheels are a little spring loaded...does it climb any carpets?

      Delete
    5. ruslanzel11 November 2018 at 22:05

      Hello. This version do not climb carpets, only floors without carpets...

      Delete
  3. Unknown10 May 2020 at 23:24

    I asked for the program code, is it OK?

    ReplyDelete
    Replies
    1. ruslanzel12 May 2020 at 20:04

      Hello!!!
      If You all made and connected right.. Program code is OK...Code You can redacted...

      Delete
  4. TamiraBot10 June 2020 at 08:46

    Hi,
    Its a great project. I am printing your models. Its output are great. But i have some doubts on 3D printing because basically i am very new and also i am a programmer.

    Question 1 - can you advise on bottom 04 support to be given for printing.
    Question 2 - Can you advise on vaccuum case walls support to be given for 3D printing ?

    ReplyDelete
    Replies
    1. ruslanzel12 June 2020 at 14:35

      Hi! Thank for your excellent mark... Answers You can find
      https://robvaccleaner.blogspot.com/p/answers.html
      Best wishes.
      P.S. ...as well was added little bit photos from my collection... :)

      Delete
  5. Bozhan14 July 2020 at 00:15

    ı starting to print this project firstly bottom part. Thank you so much . The project looks very good .

    ReplyDelete
  6. ruslanzel14 July 2020 at 22:43

    Hello.. You are welcome..and good luck in assemble..I believe You will make it... Best wishes.

    ReplyDelete
  7. coldisk21 July 2020 at 12:34

    Hello and thank you for your project. I'm new with 3D printing and I wanted to know if i can print parts with PLA or ABS ?

    ReplyDelete
  8. ruslanzel21 July 2020 at 14:03

    Hello!
    Thanks for your question.
    I printed and recommend print out from PETG, because this plastic strong and elastic... Don't recommend print off from ABS!!! will get delamination..
    But print out from PLA You can attempt (I think, will be good).
    Best wishes..and good luck!

    ReplyDelete
  9. Mercosi5 August 2020 at 11:06

    Hi Ruslanzel,
    It's an amazing work that you've done! Congrats for that :) I would like to adapt your design to my own requirements. Would it be possible to share your 3D in a editable format ? So i don't have to restart a design from scratch to save a lot of time :)
    Thanks in advance for your answer

    ReplyDelete
    Replies
    1. ruslanzel5 August 2020 at 20:43

      Hello, Mercosi! Thanks for excellent mark... If You necessary file's for edition...You can use online converter (STL to ...) and then get files what You need... Best regards...

      Delete
    2. Mercsi25 August 2020 at 16:59

      Hello Ruslanzel,
      I tried all what i have found, but converters are not able to recognize the features (sketch, extruded/revolved boss/cut, and so on) used to make the solid 3D part. So it will not be easy to modify your design as I whish without the original 3D parts :'( But I understand if you don't want to share that files :')
      Kind regards

      Delete
    3. ruslanzel29 August 2020 at 09:56

      Hello... Sorry for late answer.. very busy at my basic work.. You can see https://putinizm.ru/convert-stl-to-solid-using-solidworks-cad-cam-tutorials-by-tecnisiacad Best regards.

      Delete
  10. Unknown2 March 2021 at 21:26


    Thank you very much for the project I have been looking for such a software for a long time.

    ReplyDelete
  11. pur13 June 2022 at 04:15

    Thank you very much brother,you have schematic or wiring diagram

    ReplyDelete
    Replies
    1. ruslanzel13 June 2022 at 07:16

      Hello. Only https://robvaccleaner.blogspot.com/p/assembly-instruction-part-3.html?m=1 wires sketch specialy didn't make.. sorry... But Thanks for good words. Best wishes.

      Delete
  12. Anonymous18 October 2023 at 22:48

    Do you still by chance have the 3D models available? If so where? I tried downloading the STL files but there’s an error.

    ReplyDelete
  13. Anonymous18 October 2023 at 23:26

    Hello, are these files still available to download? If so, where can they be found? Thank you.

    ReplyDelete
    Replies
    1. ruslanzel18 October 2023 at 23:54

      Hello...Take a links.
      1. Bottom
      - https://drive.google.com/file/d/15GPmmcfa12nb8OfN1HiGb_M5uQIWHzDq/view?usp=drivesdk
      2. Bumper - https://drive.google.com/file/d/1oQgOeW9WquAXPEk7eKr6WGf6vksn7JtW/view?usp=drivesdk
      3. Collector - https://drive.google.com/file/d/1d1C0HXNLBmv27-3D9UQ_5izkmE1lhczy/view?usp=drivesdk
      4. Sketch &APK - https://drive.google.com/file/d/1uwfZfYsLNHkGM-alaPDNG6g3hpKeYNNg/view?usp=drivesdk
      5. Top - https://drive.google.com/file/d/1zkFoKwfdDIehZIv8us5nm_2qoQCEOO0e/view?usp=drivesdk
      6. Case-walls - https://drive.google.com/file/d/1lWvSFiZZkXewiHUsrJb8Jdq82SZX399T/view?usp=drivesdk
      7. Wheels supports - https://drive.google.com/file/d/1Evw4jYhhMbuHwRcHUA4RD0PKqnvj8e1n/view?usp=drivesdk

      Delete

Post a Comment